SAL1000
Desk-Top model, an entry-model
Suga Co., Ltd.We design, manufacture, and sell Laboratory Use Equipment and Marine Equipment.
the reliable company for new creation
Please feel free to contact us regarding any kind of research and development.
With Suga Seisakusho's unique technical capabilities,
We will assist you in your creation.
Recommended products
-
Spark Plasma Sintering (SPS) System
SPS2000This model is the best for R&D in University/Research institute.
The process can be very quick and it requires only a small amount of powder so you can try many different things in a short time at low cost.
PICKUP
PRODUCT -
Deposition Test
This is the test service for users who are planning to purchase our products.
PICKUP
PRODUCT -
Sputtering Equipment
SSP1000Desk－Top model as a low end model and it can select the deposition direction.
PICKUP
PRODUCT -
ALD Equipment
SAL1000An affordable ALD equipment
The deposition is easily possible every atomic layers
PICKUP
PRODUCT
product list
This equipment is the system suitable for laboratory use to realize the precise step coverage deposition for uniform coating of each atomic layers.
ALD Equipment
This is a film deposition system that utilizes the sputtering phenomenon in which Ar ions collide with the target under plasma discharge, and the target material ejected by the collision are deposited on the substrate as a film.
Sputtering Equipment
SPS system enables you to obtain sintered compacts with high quality (better properties, better homogeneity, etc.) by applying pulsed DC current directly onto powder / molds, while they consider materials difficult to sinter with conventional sintering methods.
Material Synthesis System
PEEM is an electron microscope that detects photoelectrons emitted from a sample by irradiating short wavelength light such as ultraviolet light.
Photo Emission Electron Microscopy (PEEM)
Necessary parts for vacuum equipment and vacuum fixture are available.
Vacuum device
This is a vacuum evaporation system for the deposition of metal films and oxide films.
Evaporation system
High-temperature heat treatment and gas replacement for substrates are possible. SAN2000Plus is capable of plasma processing.
Annealer
This model is the atmosphere controlled furnace heating up samples placed within a quartz furnace tube.
Furnace
This can be used for the development of the space environment
simulation and satellite components.
Space Chamber
Turn engine power into a generator or pump
clutch to transmit.
Marine hydraulic crane, Net Hauler, Winch.
Marine Equipment
Click here if you would like to see more details.
ALD Equipment
This equipment is the system suitable for laboratory use to realize the precise step coverage deposition for uniform coating of each atomic layers.
As a related matter, we also introduce Annealing equipment to enhance the quality of the film after the deposition process.
SAL1000B
This model is capable of depositing all over the surface for both powder and solid particles.
SAL1000G
Desk-top ALD with Glove Box, Deposition to the powder possible
SAL3000
Deposition direction, glove box and LL chamber can be selected.
SAL3000Plus
Expandable Model. Deposition direction selectable.
Substrate Heating up to 800℃
SAN1000
Pressure control during heat treatment (annealing) to the substrate and heat treatment by introducing inert gas is possible.
SAN2000Plus
The temperature control of Max.1000deg.C is achievable and RF power source can be equipped with and the combination with other systems can be possible.
Sputtering Equipment
This is a film deposition system that utilizes the sputtering phenomenon in which Ar ions collide with the target under plasma discharge, and the target material ejected by the collision are deposited on the substrate as a film.
As a related matter, we also introduce Annealing equipment to enhance the quality of the film after the deposition process.
SSP1000
Desk－Top model as a low end model and it can select the deposition direction.
SSP2000Plus
Expandable Dual-cathode slim tower
SSP2500G
Dual cathode model with glove box. Auto-matcher is standard.
SSP3000
Triple cathode, substrate heating MAX800 ℃, film thickness distribution ± 3%
SSP3000Plus
Triple cathode, substrate heating up to Max.800℃, film thickness distribution ±3%, Expandable type.
SAN1000
Pressure control during heat treatment (annealing) to the substrate and heat treatment by introducing inert gas is possible.
SAN2000Plus
The temperature control of Max.1000deg.C is achievable and RF power source can be equipped with and the combination with other systems can be possible.
Material Synthesis System
SPS2000
This model is the best for R&D in University/Research institute.
The process can be very quick and it requires only a small amount of powder so you can try many different things in a short time at low cost.
Photo Emission Electron Microscopy (PEEM)
PEEM is an electron microscope that detects photoelectrons emitted from a sample by irradiating short wavelength light such as ultraviolet light.
MyPEEM
2 dimensions mapping can be performed in real time to see the status of the electron (work function) on the surface of the sample.
Vacuum device
Necessary parts for vacuum equipment and vacuum fixture are available.
Electromagnetic Rotary Pump Valve
This valve corresponds to in-house produced isolation valves; NW25 and NW40.
Vacuum Chamber
It can be fabricated in either stainless steel or aluminum.
JIS Vacuum Flange
VG/VF as vacuum flange (JIS Standard) are available as our in-house products.
Vacuum Joint
Pipe and joint are welded with a vacuum flange.
A special order is also available.
Evaporation system
This is the model to evaporate metals onto substrates.
SEV2000Plus
This is a vacuum evaporation system for the deposition of metal films and oxide films.
Annealer
High-temperature heat treatment and gas replacement for substrates are possible. SAN2000Plus is capable of plasma processing.
SAN1000
Pressure control during heat treatment (annealing) to the substrate and heat treatment by introducing inert gas is possible.
SAN2000Plus
The temperature control of Max.1000deg.C is achievable and RF power source can be equipped with and the combination with other systems can be possible.
Furnace
This model is the atmosphere controlled furnace heating up samples placed within a quartz furnace tube.
SAF3000
Precise temperature control, pressure control, water vapor introduction and rapid cooling are possible.
Space Chamber
This can be used for the development of the space environment
simulation and satellite components.
Space Chamber -Φ1m-
Various introduction ports.
Marine Equipment
It transmits the engine power to the generator and pump.
Hoist
This is the best for the hoisting part of light capacity crane to save the hoisting work.
Winch for Dredge Net
This model is mainly used to dredge scallops and sea cucumbers from the bottom of the sea.
Net Hauler
The labor work of the net lifting can be saved and custom-made machine as well as the steel and aluminum is also possible.
Shellook
There are three types of Shellooks (300, 500,500A)which can be used for small vessels,etc.
SUS Steel Net Hauler
It is made of rust-resistant SUS.
MMC-Electromagnetic Clutch
It is used for the counter and the pump unit and transmit the engine rotation power to the pump.
Air Clutch
It is mainly used for the spindle front drive and transmit the engine rotation power to the generator.
Service list
This is useful in situations like this.
Laboratory Use Equipment
Advanced Material Development System
Marine Equipment
Installation Case
-
Introduction case of sputtering equipment. Laboratory of Nanoelectronics, Graduate School of Information Science and Technology, Hokkaido University, specially appointed Professor Kazuhisa Sueoka.
This time, we interviewed Prof. Kazuhisa Sueoka, chamberlain at Laboratory of Na
-
Case study introduction of SUGA’s ALD equipment. - Designated Professor Tamotsu Hashizume, Research Center for Integrated Quantum Electronics, Hokkaido University
This time, we interviewed Professor Tamotsu Hashizume who has installed Suga's A
About Suga Co., Ltd.
To provide superior equipment to assist the innovation and creativity to materialize our customer’s vision.
Founded in 1946 as a fishing boat equipment repair business.After that, we started manufacturing and selling fishing equipment, For many years, we have provided marine equipment such as hydraulic equipment and fishing equipment, with a focus on power transmission clutch systems for fishing machine.
Topics
-
Interview with President and CEO of SUGA Co., Ltd. - Creating new value through collaboration, based on the originality of the customer.
Ikumasa SUGAPresident and CEOSUGA Co., Ltd. Let's work together to provid
-
Vacuum has brought a miracle to plastic bottles! Carbon is the secret behind the easy drinking of beverages in plastic bottles!
Plastic bottles make it easy to drink soft drinks anytime, anywhere. Th
