We’ve released a new video on Sugino Seisakusho’s official YouTube channel!
In our previous video, we explored the overall back-end process that transforms a silicon wafer into a finished semiconductor product. Starting with this video, we’ll take a closer look at each process in greater detail.
Our first topic is dicing, one of the key steps in the early stages of semiconductor back-end processing!
Hundreds or even thousands of chips are fabricated on a single wafer. Dicing is the process of separating these individual chips, also known as dies. Although silicon wafers are hard like glass, they are also extremely brittle. Even a small amount of stress during cutting can cause chipping or cracks along the edges.
In this video, we take an in-depth look at three major dicing methods used to separate these delicate wafers with high precision while minimizing damage to the chips.
[Key Highlights]
- Blade Dicing: A thin, circular blade embedded with diamond particles rotates at high speed to mechanically cut the wafer. Pure water is sprayed during cutting to remove heat and silicon debris.
- Laser Dicing (Stealth Dicing): A laser is focused inside the wafer to create a modified layer. The wafer is then separated along this layer by expanding the tape attached to its underside.
- Plasma Dicing: Applying dry etching technology, reactive plasma gas removes the exposed areas between chips, known as streets.
- Comparing the Three Methods: We explore the characteristics and applications of each method, including chipping prevention, suitability for thin wafers, and processing speed.
Different dicing methods are selected depending on factors such as chip size and wafer thickness. Discover the precision technologies behind semiconductor manufacturing that are rarely seen in everyday life.
In our next video, we’ll explain the mechanism of wire bonding, the process that electrically connects individual chips to the outside world.
▼ Watch the video here:
https://www.youtube.com/watch?v=QOUvt2JeD0Y





