Products

Necessary parts for vacuum equipment and vacuum fixture are available.

Advanced Material Development System

Material Synthesis System

Spark Plasma Sintering System(SPS)

SPS2000

This model is the best for R&D in University/Research institute.
The process can be very quick and it requires only a small amount of powder so you can try many different things in a short time at low cost.

To details

Laboratory Use Equipment

Vacuum Equipment

Photo Emission Electron Microscopy (PEEM)

PEEM is an electron microscope that detects photoelectrons emitted from a sample by irradiating short wavelength light such as ultraviolet light.

MyPEEM

2 dimensions mapping can be performed in real time to see the status of the electron (work function) on the surface of the sample.

To details

Sputtering Equipment

This is a film deposition system that utilizes the sputtering phenomenon in which Ar ions collide with the target under plasma discharge, and the target material ejected by the collision are deposited on the substrate as a film.
As a related matter, we also introduce Annealing equipment to enhance the quality of the film after the deposition process.

SSP1000

Desk-Top model as a low end model and it can select the deposition direction.

To details

SSP2000Plus

Expandable Dual-cathode slim tower

To details

SSP2500G

Dual cathode model with glove box. Auto-matcher is standard.

To details

SSP3000

Triple cathode, substrate heating MAX800 ℃, film thickness distribution ± 3%

To details

SSP3000Plus

Triple cathode, substrate heating up to Max.800℃, film thickness distribution ±3%, Expandable type.

To details

SAN1000

Pressure control during heat treatment (annealing) to the substrate and heat treatment by introducing inert gas is possible.

To details

SAN2000Plus

The temperature control of Max.1000deg.C is achievable and RF power source can be equipped with and the combination with other systems can be possible.

To details

ALD Equipment

This equipment is the system suitable for laboratory use to realize the precise step coverage deposition for uniform coating of each atomic layers.
As a related matter, we also introduce Annealing equipment to enhance the quality of the film after the deposition process.

SAL1000B

This model is capable of depositing all over the surface for both powder and solid particles.

To details

SAL1000G

Desk-top ALD with Glove Box, Deposition to the powder possible

To details

SAL3000

Deposition direction, glove box and LL chamber can be selected.

To details

SAL3000Plus

Expandable Model. Deposition direction selectable.
Substrate Heating up to 800℃

To details

SAN1000

Pressure control during heat treatment (annealing) to the substrate and heat treatment by introducing inert gas is possible.

To details

SAN2000Plus

The temperature control of Max.1000deg.C is achievable and RF power source can be equipped with and the combination with other systems can be possible.

To details

Evaporation system

This is the model to evaporate metals onto substrates.

SEV2000Plus

This is a vacuum evaporation system for the deposition of metal films and oxide films.

To details

Annealer

High-temperature heat treatment and gas replacement for substrates are possible. SAN2000Plus is capable of plasma processing.

SAN1000

Pressure control during heat treatment (annealing) to the substrate and heat treatment by introducing inert gas is possible.

To details

SAN2000Plus

The temperature control of Max.1000deg.C is achievable and RF power source can be equipped with and the combination with other systems can be possible.

To details

Transfer Unit

This model is the substrate transfer arm to be responsible for the  Load Lock function and substrate transfer.

STR2000

This is the space-saving automated substrate transfer arm which can connect with 3 plus series.

To details

Furnace

This model is the atmosphere controlled furnace heating up samples placed within a quartz furnace tube.

SAF3000

Precise temperature control, pressure control, water vapor introduction and rapid cooling are possible.

To details

Space Chamber

This can be used for the development of the space environment
simulation and satellite components.

Space Chamber -Φ1m-

Various introduction ports.

To details

Other Equipment

Wet Etching Equipment

This equipment is used to remove the thin film which is not masked.

SWE1000

Chemicals, H2O and Nitrogen are introduced by the spray.
Recipes can be created.

To details

Vacuum device

Vacuum Piping Parts

Necessary parts for vacuum equipment and vacuum fixture are available.

Electromagnetic Rotary Pump Valve

This valve corresponds to in-house produced isolation valves; NW25 and NW40.

To details

Vacuum Chamber

It can be fabricated in either stainless steel or aluminum.

To details

JIS Vacuum Flange

VG/VF as vacuum flange (JIS Standard) are available as our in-house products.

To details

Vacuum Joint

Pipe and joint are welded with a vacuum flange.
A special order is also available.

To details

Marine Equipment

System device

Clutch for the ship

It transmits the engine power to the generator and pump.

MMC-Electromagnetic Clutch

It is used for the counter and the pump unit and transmit the engine rotation power to the pump.

To details

Air Clutch

It is mainly used for the spindle front drive and transmit the engine rotation power to the generator.

To details

Hydraulic Crane

This crane was developed for the vessel.

Shellook

There are three types of Shellooks (300, 500,500A)which can be used for small vessels,etc.

To details

Hydraulic Fishing Machine

This is the hoisting machine and winch for the hoisting work.

Hoist

This is the best for the hoisting part of light capacity crane to save the hoisting work.

To details

Winch for Dredge Net

This model is mainly used to dredge scallops and sea cucumbers from the bottom of the sea.

To details

Net Hauler

The labor work of the net lifting can be saved and custom-made machine as well as the steel and aluminum is also possible.

To details

SUS Steel Net Hauler

It is made of rust-resistant SUS.

To details

Component

Pulley, Pulley Adaptor

We assure you of the solid power transmission.。

Standard 5V Pulley

This 5V pulley is readily available from stock.

To details

Pulley Adaptor

This 5V pulley is readily available from stock.

To details

Special pulley

Stepped pulley and 3V,5V,8V, A,B,C are available.

To details

Front Pulley

It can be provided corresponding to various engines.

To details

Drum

There are an abundant line-up products corresponding to each types of hoisting.

Warping Drum

We have an abundant line-up.
A warping drum can be manufactured by either Casting or Aluminum.

To details

Hoisting Drum

A hoisting drum can be manufactured fromφ250to φ800mm
using FC250, FC300 or FC3%Cr.

To details

Bucket Type SUS Drum

This drum is used for the hoisting. Contact us for further information.

To details